MATRIX-2000™ REFERENCE MANUAL
8
Parameters to verify/modify:
Operating Mode
Sets the parameters which customize the reader operating
mode starting from three main modes:
One Shot: acquires a single image based on the selected
value for the Acquisition Trigger and Acquisition Trigger
Delay.
Continuous: continuously acquires images with a rate up to
the maximum allowable frame rate per second for the
given sensor depending on the decoding time and the
Region of Interest settings.
Phase Mode: acquires images during the reading phase
depending on the selected value for the Acquisition Trigger
and Acquisition Trigger Delay. The Reading Phase-ON
and Reading Phase-OFF events mark respectively the
beginning and end of the reading phase.
Calibration
Calibrates the acquisition parameters to maximize the
reading performance (see par. 8.4.3).
Communication
Configures the parameters relative to each serial port
regarding the transmission, message formatting and string
receiving.
Any change to the VisiSet™ communication port
parameters (baud rate, data bits, etc.) is effective as soon
as the reader is disconnected from VisiSet™.
Ethernet
Sets the parameters related to the Ethernet interface and
to its communication channels.
Fieldbus
Sets the parameters related to the External Fieldbus
interface through the CBX500 and to its communication
channels.
Reading System Layout
Allows configuring the device according to the desired
layout: Standalone, or Master/Slave RS232
Image Processing
Sets the image processing parameters shared by all
available symbologies.
1D & 2D, Postal Codes
Sets the characteristics of the code symbologies to be
read.
Data Collection
Defines the code-collection parameters and the output
message format.
Digital I/O
Configures the reader input/output parameters.
Match Code
Allows setting a user-defined code and relative parameters
to which the read code will be compared (matched).
Miscellaneous
Sets the reader name and the saved image format.
Symbol Verification
Sets the parameters relative to the various specifications in
the Standards which regulate code validation.
LEDs And Keypad
Sets the X-PRESS™ LED and Keypad parameters related to
their selected Functions: Beeper, Autolearning, Positioning,
etc.
74
