RAPID CONFIGURATION
1
NOTE
Autolearning configuration parameters can be saved to temporary memory
only by selecting the "Autolearning Setup>Store Memory" parameter in
VisiSet™.
The Autolearning function on the keypad button can also be disabled by the
user via VisiSet™.
green
Auto Learn (F2)
Figure 7 – Auto Learn Function
Repeat the procedure if needed, to program different code symbologies, however you must
present only one code at a time to the reader.
Matrix-2000™ is able to decode any code symbology in its library with this procedure.
NOTE
If your application has been configured using Auto Learn, your reader is ready.
If necessary you can use VisiSet™ for advanced reader configuration.
Positioning (Optional)
At the end of the
Auto Learn
procedure, you can use the
Positioning
procedure to center the
code with respect to the reader's FOV.
1. While the desired code is in front of the reader at the correct reading distance, enter the
Positioning
function
(F1)
by pressing and holding the push button until only the F1 LED is
on: Matrix-2000™ also beeps once.
2. Release the button to enter the Positioning function.
Once entered, the reader continuously acquires images and gives visual feedback using
the F1 LED to indicate when the code is centered with respect to the reader's FOV. Slow
blinking means that the positioning value must be improved.
3. To obtain the best value in terms of positioning, move the code and/or the reader so as to
position the code as close as possible to the center of the Field of View, keeping the
correct focus distance. Check F1 LED blinking: the best code positioning corresponds to
fast (almost continuous) blinking.
4. After a short timeout the function automatically exits, the F1 LED remains on continuously
and then stops blinking. Matrix-2000™ also emits 3 high pitched beeps.
If no valid code is present in the FOV, after about 3 minutes, Matrix-2000™ will automatically
exit, the F1 LED will not remain on continuously but it will just stop blinking. In this case,
Matrix-2000™ emits a long low pitched beep.
7
