Datalogic C-BOX 200, Installation Manual

Page: 23 / 28

C-BOX 200 DATALOGIC
14 - Installation
2.4.7 OM4000 Jumper Settings
J1 J2
Figure 2.13 - OM4000 jumpers
The jumpers allow connection to the EXT TRIG signals on separate spring
clamp terminals for applications which use the OM4000 Oscillating Mirror in
Trigger Mode.
They are used together and they have the following significance:
when a jumper is in the J1 position (see Figure above) pin 40 is connected to
pin 27 (EXT TRIG+); a jumper in J2 position connects pin 20 to pin 28 (EXT
TRIG-).
If the jumpers are removed pin 20 and pin 40 are disconnected.