DATALOGIC
C-BOX 200
Installation -
11
2.4.4 Multidrop Address Selection
For RS485 half-duplex interface connections, the scanner multidrop address
should be set using the rotary switches placed inside the C-BOX 200.
The valid address range is from 00 to 31. This value is read only at power-
on; any change at run-time has no effect.
If an invalid value is detected (32-99) the C-BOX cannot communicate with
the Multiplexer and the green LED remains off. Furthermore, the SEND
command configures the scanner using the previously configured valid
scanner address.
UNITS
TENS
Figure 2.10 - Rotary switches
Summary of Contents for C-BOX 200
Page 1: ...C BOX 200 Installation Manual...
Page 2: ...C BOX 200 INSTALLATION MANUAL...
Page 9: ...viii...
