Datalogic BC9XX0-BT, Quick Reference Manual

Page: 12 / 28

BC9XX0-BT Configuration
8 BC 9xx0-BT Cradle
BC9XX0-BT Configuration
The BC9XX0-BT configuration can be performed in three ways: by using the
Datalogic Aladdin
™
software configuration program, by sending configuration
strings from the Host PC via the RS232 or USB-COM interface or by reading
configuration bar codes with the PowerScan™ BT9X00 reader.
Datalogic Aladdin™
Datalogic Aladdin
™
is a multi-platform utility program that provides a quick
and user-friendly configuration method via the RS232/USB-COM interface. It
also allows upgrading the software of the connected device (see the Datalogic
Aladdin
™
Help On-Line for more details).
Serial Configuration
By connecting the BC9XX0-BT to a PC through an RS232 or USB-COM inter-
face cable it is possible to send configuration strings from the PC to BC9XX0-
BT.
Configuration Bar Codes
Link the cradle and the reader using the procedures described in the Power-
Scan™ BT9X00 Quick Reference. Once the pairing is complete, you can config-
ure the BC9XX0-BT cradle by reading configuration bar codes in this manual.
To configure the BC9XX0-BT using the PowerScan™ BT9X00 reader (paired to
the cradle with the Bind command), follow the procedure according to the
interface selected.
Resetting Standard Product Defaults
Reference the PRG for a listing of standard factory settings. If you aren’t sure
what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the
Standard Product
Default Settings bar code below to copy the factory configuration for the cur-
rently active interface to the current configuration.
NOTE
Factory defaults are based on the interface type. Configure the reader
for the correct interface before scanning this label.
CAUTION
Scanning this bar code will RESET all settings for the PowerScan ™
BT9X00. Any customized settings that may have been applied to the
reader will be lost.
Standard Product Default Settings