Datalogic BC9XX0-BT, Quick Reference Manual

Page: 13 / 28

Selecting the Interface Type
Quick Reference Guide 9
To change the defaults refer to the PowerScan™ 9X00 PRG, or to the Datalogic
Aladdin
™
Configuration program, both downloadable from the Datalogic web-
site.
Selecting the Interface Type
Upon completing the physical connection between the reader and its host,
scan the appropriate bar code for your system’s correct interface type.
Configuring the Interface
Scan the programming bar code which selects the appropriate interface type
for the system the reader will be connected to.
NOTE
Unlike some other programming features and options, interface selec-
tions require that you scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scanning an interface selec-
tion bar code.
Some interfaces require the scanner to start in the disabled state when
powered up. If additional scanner configuration is desired while in this
state, pull the trigger and hold for 5 seconds. The scanner will change
to a state that allows programming with bar codes.
RS232
RS232 standard interface
Select RS232-STD
RS232 Wincor-Nixdorf
Select RS232-WN
RS232 for use with OPOS/UPOS/JavaPOS
Select RS232 OPOS