DM984 product family
CHAPTER 11. IPSAN CONFIGURATION
interface gpon <unit>/<ponlink> onu <id>
Description of the used parameters:
Name
Format
Description
<unit>
Number (1-7)
Card slot of the plugged in GPON card
<ponlink>
Number (1-8)
Ponlink the ONU is connected to
<id>
Number (1-128)
ID that was chosen during registration process
Note:
All other configurations described in the ONU configuration section are
based on this menu.
11.8.1 Assigning VLAN rules
This is done in the menu of the Ethernet interface at the ONU. To get into this
menu the following command must be issued:
eth-uni <id>
Description of the used parameters:
Name
Format
Description
<id>
Number (1-4)
ID of the Ethernet port
Example:
DM4650(config-if-gpon-7/1/1)#eth-uni 1
DM4650(config-if-gpon-eth-uni-7/1/1/1)#
After that it is possible to assign a previously created VLAN rule:
vlan-translation-rule <name>
Description of used parameters:
Name
Format
Description
<name>
Alphanumeric
Name of a previously created VLAN rule
Example:
DM4650(config-if-gpon-eth-uni-7/3/1/1)#vlan-translation-rule a1
DM4650(config-if-gpon-eth-uni-7/3/1/1)#
11.8.2 Assigning Native VLANs
This is done in the menu of the Ethernet interface at the ONU. To get into this
menu the following command must be issued:
DATACOM
204.4288.00