
DM984 product family
CHAPTER 11. IPSAN CONFIGURATION
DM4650(unit-gpon-7)#authentication-method serial-number
DM4650(unit-gpon-7)#
Before registering an ONU, however, it is necessary to bring up the ponlink the
ONU is connected to. To do that it is necessary to go into the ponlink menu by
typing
interface gpon <unit>/<ponlink>
Description of the used parameters:
Name
Format
Description
<unit>
Number (1-7)
Card slot of the plugged-in GPON card
<ponlink>
Number (1-8)
Ponlink the ONU is connected to
After that the ponlink needs to be brought up by typing
no shutdown
It is possible to check if the IPSAN discovered the serial number of the ONU by
typing
show interfaces gpon <unit>/<ponlink> discovered-onus
Description of the used parameters:
Name
Format
Description
<unit>
Number (1-7)
Card slot of the plugged-in GPON card
<ponlink>
Number (1-8)
Ponlink the ONU is connected to
Note
: To register an ONU it isn’t mandatory to discover the ONU first. It
is also possible to configure it in advance and just connect it later on. Once it
gets discovered by the IPSAN it will be registered and configured automatically.
The following steps are done in the configuration menu. To proceed with the
registration procedure it is necessary to go into the menu of the ponlink the ONU
is connected to by typing
interface gpon <unit>/<ponlink>
Description of the used parameters:
Name
Format
Description
<unit>
Number (1-7)
Card slot of the plugged-in GPON card
<ponlink>
Number (1-8)
Ponlink the ONU is connected to
Next the registration procedure is issued with the following command
DATACOM
204.4288.00