
DM984 product family
CHAPTER 11. IPSAN CONFIGURATION
show this
When performing this command a lot of information is printed out at the com-
mand line, regarding whether the ONU is up and active, which profiles are as-
signed, as well as other ONU characteristics.
Example:
DM4650(config-if-gpon-7/3/2)#show this
Showing ONU 7/3/2
Name:
Serial number:
DACM00000000
ONU profile:
default
TCONT VP Bind profile:
default
Flow profile:
default
IP address:
0.0.0.0/0
Default gateway:
0.0.0.0
DHCP:
disabled
IP Host VLAN:
VLAN=1(0)
Max MAC per eth-uni:
0
Operational state:
down (Inactive)
Anti Rogue ONU isolate: disabled
SWDL state:
None
Vendor ID:
Version:
Equipment ID:
Active FW:
(not valid)
Standby FW:
(not valid)
Sub-option mode:
both (circuit-id + remote-id)
Allocated bandwidth:
512(fixed), 512(fixed) - kbps
DM4650(config-if-gpon-7/3/2)#
Note:
One of the most important items for troubleshooting is the operational
state. When the ONU is fully shutdown it will show ’down (Inactive)’. When the
ONU is fully operational it will show ’up (active)’. When the ONU itself is not
fully operational but the optical connection is (for example after a reboot of the
ONU) it will show ’down (active)’.
11.3 Checking the Firmware version of the ONU
The firmware version is visible when checking the status of the ONU with the
following command when in the ONU menu:
show this
DATACOM
204.4288.00