Datacom Systems Inc
4X16SP-1000BT Copper Gigabit SPAN Switch • USER
guide
10
Front Panel Description —
Figure 2
illustrates the Copper
Gigabit SPAN switch front panel. This is the location for all network cable connec-
tions and status LEDs.
Figure 2 - 4X16SP-1000BT Front Panel
An explanation of each panel legend follows:
POWER 1
&
2 —
Two power source circuit connections are provided. Use of a second different external
power source circuit than the first is strongly recommended to assure uninterrupted oper-
ation. Furthermore, connecting the second power source circuit to a different external
power source circuit than the first helps to eliminate power as a single point of failure. The
POWER 1
and
2
LEDs illuminate indicating power 1 and 2, respectively, are on. Either LED
not illuminated indicates a lack of power and immediate investigation is required to insure
redundant power integrity.
GRAPHIC DISPLAY —
This scrolling graphic displays 4X16SP-1000BT Copper Giagbit Switch power-on and
operating status information.
MANAGEMENT PORT —
This port is used for remote 4X16SP-1000BT Copper Giagbit Switch control with an
RJ45 connector connection to the network. These connectors have integrated LEDs
that display status of each port. See
Table 1
for LED display.
Green — 1,000 Mbs
Orange — 100 Mbs
OFF
— 10 Mbs
LED Display
Left LED — Notch Up
Solid Green — Link
Flashing Green — Data
WITH LINK OR DATA
Right LED — Notch Up
Table 1 - LED Display
NOTCH UP
Green — 1,000 Mbs
Orange — 100 Mbs
OFF
— 10 Mbs
Left LED — Notch Down
Solid Green — Link
Flashing Green — Data
WITH LINK OR DATA
Right LED — Notch Down
NOTCH DOWN
