22
Installing the Printer Driver
9.
Use the printer LCD panel to set IPSec Type to Preshared Key.
10.
Install the printer using a USB connection and install the Status Monitor. See
“Install
using a USB connection” on page 9
and
“Installing the Status Monitor” on
page 30
for the steps to follow.
11.
Open the Status Monitor as an administrator. See the
Open the Status Monitor
section
in the
User Guide
.
12.
Click the Printer Select tab. It shows the Security settings chosen on the printer in
steps 8 and 9 above. Do the following:
A.
Click Details. The IPSec Setting dialog box opens.
B.
Choose Preshared Key from the Download Type list.
C.
Click Select. The Select Certificate Download File dialog box opens.
D.
Browse to the location of the key file from step 1.
E.
Select the file and then click Write. The Status Monitor sends the file to
the printer.
13.
Remove the USB cable connecting the printer and PC.
14.
Install the printer using a LAN connection See
“Install using a Network connection”
on page 22
.
Install using a Network connection
If your network administrator will assign the network address to the printer, obtain the network
address before beginning this procedure.
1.
Install printer supplies and power on the printer. See
Using the Printer
in the
User
Guide
to install supplies and power on the printer.
2.
Connect the Ethernet able to the network and to the printer. See
“Connecting the
Data Cable” on page 8
for the steps to follow.
3.
Set Network > Host Interface to
LAN
, as described in the
Printer LCD Panel
section
of the
User Guide.
4.
If you will use DHCP addressing, choose
On
for Network > DHCP, as described in the
Printer LCD Panel
section of the
User Guide.
5.
If you are using static addressing, set Network > DHCP to
Off.
Set the IP address
using the LCD panel, as described in
“Setting Network Address Values” on
page 18
.
6.
After saving settings, power the printer off, wait a minute, and then power the printer
on.
7.
If you set DHCP to On, view the network address, as described in the
Printer LCD
Panel
section of the
User Guide.
8.
Start the Windows
®
XP, Windows 2000 or Windows Vista
®
operating system and log
in as a user with Administrator permissions.
