RP90 Plus E Card Printer Installation Manual
9
Installing the Printer Driver
Do not connect the printer data cables or power on the printer until directed to do so.
You can install the printer in one of the following ways:
•
Using a USB connection. See
“Install using a USB connection” on page 9
.
•
Using a Network connection. See
“Install using a Network connection” on
page 22
.
•
If you need to assign a different printer name, set up IPSec security, set IP
addresses from the PC, you need to follow different procedures. See
“About
Network Installation” on page 18
for details.
•
Sharing a printer over a network. See
“Sharing a Printer on a Network
Connection” on page 32
You can also install the Status Monitor. See
“Installing the Status Monitor” on page 30
.
Install using a USB connection
1.
Start the Windows
®
XP, Windows 2000 or Windows Vista
®
operating system and log
in as a user with Administrator permissions.
2.
Insert the RP90 Plus E Support CD-ROM in
the PC drive.
3.
On Windows Vista, a User Account Control
dialog might appear. Click
Allow
to continue.
4.
When the opening window is displayed,
choose
Install the Printer
.
5.
Choose
Install the RP90 Plus E Driver
.
6.
On Windows Vista, click “Allow” on the
Security dialog box and then click “Continue” on the User Account Control Dialog.
