28
Installation
4.
Set the static IP address, subnet mask, and gateway address.
a.
Press E
NTER
to enter the Static IP menu. IP Address
displays on line 2.
b.
Press E
NTER
to set the static IP address.
The IP address has four sections, separated by periods. A
cursor appears under the digit that will change.
i.
Use the arrow keys to change one digit at a time.
ii.
The address section shows three digits when it can
be changed and the cursor is under the right-most
digit. Press E
NTER
to navigate to the next section of
the address.
iii.
When all four sections are correct, press E
NTER
.
Subnet Mask displays on line 2 of the LCD panel.
c.
Repeat steps i through iii to enter the subnet mask
and gateway address.
5.
Press E
NTER
when you finish entering all the required
address information. Apply displays on line 2.
6.
Press E
NTER
to apply your changes.
7.
Press the down arrow key to scroll to Exit on line 2.
8.
Press E
NTER
. Then, press the U
SER
button to return the printer to Ready. The U
SER
button
glows green.
