18
Installation
Load the Topping Foil Cartridge
1.
Prepare the topping foil cartridge and topping roll.
a.
Unlock and open the embosser supplies access
door and remove the topping foil cartridge.
The topping foil cartridge is on the left.
b.
Place the topping foil cartridge on a flat
surface with the spindles facing up.
c.
Remove the topping foil from its package.
2.
Secure the supply spool to the spindle.
a.
Match the keyed pattern of the blue supply
spool hub with the right-side spindle.
b.
Push the supply spool into the spindle until it
clicks securely into place.
3.
Roll out and route the foil around the rollers on
the topper foil cartridge. A diagram on the
cartridge shows the correct routing pattern.
4.
Secure the silver take-up spool to the spindle.
a.
Match the keyed pattern of the take-up spool
hub with the left-side spindle.
b.
Push the take-up spool into the spindle until
it clicks securely into place.
5.
Turn the take-up spool one full turn
counterclockwise to take up foil slack.
Supply
Spool
Take-up
Spool
