background image

CE870 Instant Issuance System Installation and Administrator’s Guide

113

 

Card Handling

These guidelines apply to unprinted cards.



Any debris or particles on blank card stock can reduce card quality and damage the system.



Grease or oils, such as oils from your fingers, also reduce card quality. Keep cards completely 
clean. Do not touch the print surface of a card with your fingers or hands. Handle blank card 
stock by the edges only or wear gloves.



Do not use a rubber band to bind blank cards together.



If you drop a card on the floor, clean it using a lint-free cloth before using it in the system.

Card Storage

These guidelines apply to both blank card stock and processed cards.



Use cards that are at room temperature. If cards are stored in a cooler environment than the 
printer, allow them to reach room temperature before using.



Stack cards so that they will not shift and rub against each other.



Make sure that the magnetic stripe on one card does not come in contact with the magnetic 
stripe on another card.



Make sure that cards with magnetic stripes are stored away from magnetic objects.



Store cards in a cool, dry, and dark place. Excessive light can cause yellowing of cards on 
exposed edges.



Keep cards in their original packaging.

Summary of Contents for CE840



































































































































Reviews: