DataCard CD Series, Installation And Manual

Page: 54 / 86

46 Printer Manager
FrontPanel
Change the front panel settings as needed, and then click Set Current to apply the
changes.
•
BacklightBrightness ‐ Set the LCD Front Panel backlight brightness at the
desired level from 1 percent (dim) to 100 percent (bright).
•
KeySenseLevel ‐ Set the key sensitivity level to a comfortable level. Select
from 0 (low sensitivity, almost a press) to 10 (high sensitivity, barely a touch).
•
LcdConfigMenu ‐ Select Enabled or Disabled to control display of the
Configuration menu on the LCD menu system. (The Status and Maintenance
menus cannot be disabled.)
•
LedCardsPickedToCleaning ‐ Set the number of cards to pick between
cleaning. The card light blinks amber when the printer reaches this value. If
this value is set to 0, cards between cleaning are not tracked.
•
LedPrintheadCyclesToCleaning ‐ Set the number of printhead cycles between
cleaning. The card light blinks amber when the printer reaches this value. If
this value is set to 0, cycles between cleaning are not tracked.
•
LedRibbonLow ‐ Set the percentage of ribbon remaining before being notified
that the ribbon is low and should be changed. The ribbon light blinks amber
when the ribbon reaches this value.
•
SpeakerEnabled ‐ Select Enabled or Disabled to turn the speaker on or off.
The speaker provides a sound in addition to the front panel lights and LCD
text.
Description
Default
Value
Current Value
(unit)
Allowable
Range
1) BacklightBrightness 100 100 [0- 100]
2) KeySenseLevel 5 5 [0 - 10]
3) LcdConfigMenu Enabled Enabled

4) LedCardsPickedToCleaning 1500 1500 [0-1000000]
5) LedPrintheadCyclesToCleaning 2500 2500 [0-1000000]
6) LedRibbonLow 10 10 [0-1000000]
7) SpeakerEnabled Enabled Enabled
