8
5. Slide the Glass frame,
item G
, on to the
front of the TP-600 ENG prompter rail,
item
A
. Ensure the upper part of the Glass
Frame,
Item G
, is leaning away from the
camera position and secure with the two
wing nut screws,
item H
.
6. There are two slots on the inside left and
right of the Glass Frame,
Item G
.
Guide/slide 60/40 Mirror Glass sheet,
item
J
, into these slots from above.
The
Red circle sticker
on the Mirror
Glass,
item J
, should be
facing camera
position / lens
.
The
Green circle sticker
on
item J
should
be facing
toward the on screen talent
/
commentator.
7. Secure the glass sheet within the frame
using the cross head screws at the top of
each frame slot.
8. Fit the adjustable mounting bracket with locking lever,
item F
, to the lower prompter rail
item B.
Use the mounting hooks in
item B
and the holes in the bottom of
item F
for marrying item F to B.
9. Decide if you need to use the TP-600 ENG
camera riser block or not.
Ideally you want the lens of your camera
positioned as close to the centre of the
60/40 mirror glass as possible.
In some cases depending on your camera
and its ENG camera plate the camera lens
may already be high enough.
