10
14. Pull the draw cord to secure the cloth
Snood / Hood,
item I
, around the camera
lens and to shut out light from the camera
side.
15. Turn on the tablet being used, install and launch the
DV Prompter
software then prepare the
prompting text to be used. Then set up for the
optional
remote control. See pages 11 and 12.
16. Put the configured tablet into the mounting
bracket and ensure it is held securely by
adjusting the size of the bracket holders
for a snug fit and locking them in place.
Use locking lever on the bottom of
item F
.
17. Adjust the prompting settings where necessary.
18. Adjust the camera exposure settings as necessary. See
Camera Exposure
below
.
19. Read the section regarding your chosen remote control. See pages 14 and 15.
Camera Exposure and the 60/40 Glass
After setting up the camera with the 60/40 glass in front of the lens adjust the camera set up and
white balance. This is because the 60/40 Glass affects the camera exposure by approximately 1 stop
almost like the effect of a neutral density filter. Consult your camera manual for further help and
advice with its exposure and white balance settings.
