Data Translation DT9835, User Manual

Page: 46 / 80

Chapter 5
36
General Checklist
Should you experience problems using the DT9835 function module,
please follow these steps:
1. Read all the documentation provided for your product. Make
sure that you have added any “Read This First” information to
your manual and that you have used this information.
2. Check the Data Acquisition OMNI CD for any README files
and ensure that you have used the latest installation and
configuration information available.
3. Check that your system meets the requirements stated in the
DT9835 Getting Started Manual.
4. Check that you have installed your hardware properly using the
instructions in the DT9835 Getting Started Manual.
5. Check that you have installed and configured the device driver
properly using the instructions in the DT9835 Getting Started
Manual.
6. Search the DT Knowledgebase in the Support section of the Data
Translation web site (at www.datatranslation.com) for an answer
to your problem.
If you still experience problems, try using the information in Table 4
to isolate and solve the problem. If you cannot identify the problem,
refer to
page 39 .