Data Translation DT3153, Getting Started Manual

Page: 22 / 64

Chapter 2
14
Viewing the DT3153 Documentation
Note: To view the DT3153 documentation, ensure that Adobe
Acrobat 4.0 or greater is installed on your system. Acrobat Reader
5.0 is provided on the Imaging OMNI CD. If you install Acrobat
Reader 5.0 from this CD, you must open Acrobat Reader and accept
the license agreement before you can view the documentation.
Once you have installed the manuals to your hard disk, you can view
these documents by accessing them through the Data Translation,
Inc\DT3153 program folder.
You can also view the documents from the Imaging OMNI CD, by
performing the following steps:
1. Insert the Imaging OMNI CD into your CD-ROM drive.
2. Click Start from the Task Bar, then click Run .
The Run dialog box appears .
3. In the Command Line edit box, enter x:\LAUNCH.EXE (where x
is the letter of your CD-ROM drive) .
4. Click OK .
The Imaging OMNI CD splash screen appears.
5. Click View Documentation
6. Click Getting Started Manuals and click DT3153 , or click User’s
Manuals and click DT3153 .
Adobe Acrobat Reader opens.