Data Translation DT3153, Getting Started Manual

Page: 19 / 64

Preparing to Use the DT3153
11
2
2
2
2
2
2
2
2
2
Installing the Software
1. Insert the Imaging OMNI CD into your CD-ROM drive.
2. Click Start from the Task Bar, then click Run .
The Run dialog box appears .
3. In the Command Line edit box, enter x:\LAUNCH.EXE (where x
is the letter of your CD-ROM drive).
4. Click OK .
The Imaging OMNI CD splash screen appears.
5. Click Install Products .
6. Click Mach I Series .
7. Click Device Drivers .
8. Click DT3153 , then click Next.
If you are using Windows 2000 or Windows XP, the installation
instructions are displayed. If you are using Windows 98 or Windows
Me, the files are copied.
9. If you are using Windows 2000 or Windows XP, click Print to
print the installation instructions, or go to the next section to
install and print the DT3153 documentation.
10. Click Main Menu , then click Exit .