Data Translation DT3152-LS, Getting Started Manual

Page: 74 / 84

Chapter 6
64
Installing DT-Acquire or LS-Acquire
To install DT-Acquire or LS-Acquire, perform the following steps:
1. Insert the Imaging OMNI CD into the CD-ROM drive.
2. Click Start from the Task Bar, then click Run .
The Run dialog box appears .
3. Enter x:\LAUNCH.EXE where x is the letter of your CD-ROM
drive).
The Imaging OMNI splash screen appears.
4. Click Install Products .
5. Click Mach I Series .
6. Click DT Acquire if you want to install DT-Acquire or click
LS Acquire if you want to install LS-Acquire.
7. Click Next .
The default installation destination folder is displayed.
8. Change the destination folder or accept the default folder, then
click
Next .
The default installation program folder is displayed.
9. Change the program folder or accept the default folder, then click
Next .
The files are copied to the specified folders.
10. Click Finish .
11. Click Main Menu .
12. Click Exit .