EASY
SENSE Q3+ and Q5+
DO185 (2)
Alter the range in Meters:
•
Use the blue buttons (
▼▲
) to scroll the list until the
pointer is pointing at
Meter
.
•
Press the green button
►
to select
Meter
.
•
Whilst in Meter mode use the blue (
▼▲
)
buttons to
move the list until the pointer is pointing at the
appropriate sensor.
•
Press the green
►
button to view the ranges available.
Note:
If there isn’t a choice of range available for a sensor then pressing this button will make the
name of the sensor momentarily display.
►
4) 576 lx
5) 23.5
°
C
6) 100.2 kPa
7) 48.6 %RH
System
►
Meter
Snapshot
Easy Log
Light:
*Indoor 1000 lx
►
In/Out 10k lx
Outdoor 100k lx
•
An asterisk * will indicate the present range selected.
Use the blue (
▼▲
)
buttons to scroll the list until the
pointer is pointing at the required range.
•
Press the green
►
button to select the range and return to Meter mode.
•
Press the red
button twice to exit Meter mode and return to the Main Menu.
Hard Reset
If
EASY
SENSE Q fails to respond to the computer or a button press, carry out a Hard
Reset.
1.
If necessary attach
EASY
SENSE Q to power.
2.
Hold the red and both blue buttons down (at the
same time) for a second and then release.
If the hard reset has been done correctly, the LCD
will display
EASY
SENSE Q and the version number
of its operating system before resetting and returning
to the main menu
If
EASY
SENSE Q still fails to respond, please contact Data Harvest.
A Hard Reset:
•
Will switch all sensors On. See page 17.
•
Will return the built-in sensors to their default range (Light - Indoor 1,000 lx,
Temperature - Celsius 0 to 110
˚
C, Barometric Pressure - 85 to 110 kPa). See page 10
for altering the selected range.
•
It does
not
erase any stored data sets but if a recording is interrupted by a reset, then
the data being captured will not be stored.
©
Data Harvest Group Ltd.
25
