background image

EASY

SENSE Q3+ and Q5+ 

 

DO185 (2) 

Bluetooth or No Bluetooth  

If Bluetooth has been built-in it will show listed as Bluetooth. If not then the System 
menu will show ‘No Bluetooth’.  

 

 

Use the blue (

▲▼

) buttons to scroll until the pointer is pointing to the appropriate 

menu item. Press the green 

 button to select.  

 

Note:

 If you have already ‘paired’ your 

EASY

SENSE Q logger do

 not 

select ‘Pair Bluetooth’ – this 

action will delete any existing pairing and you will have to complete the Bluetooth pairing process 
again. 
 

Bluetooth On/Off 

– use to switch Bluetooth from On 

to Off or visa versa. Use the blue (

▲▼

) buttons to 

scroll between ON and OFF. Pressing the green 

 

button to select your choice and return to the System 
menu.  

 

 Bluetooth On/Off    

  Pair Bluetooth 

   

 

 Bluetooth is ON 

 

Paired: 000B0D6904AE  

 
The number shown as ‘paired’ is the MAC address for 
the Bluetooth device that it is currently paired with.  

 

Note:

 If the only option available is OFF, then the logger is not currently paired with a computer. See 

page 32 for pairing information.  
 

When 

EASY

SENSE Q is awake and Bluetooth is On, the blue indicator LED will be 

lit. 

 
Pair Bluetooth

  

Selecting ‘Pair Bluetooth’ will delete any existing pairing and will initiate the Bluetooth 
pairing process. See page 32 for instructions.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

©

 Data Harvest Group Ltd. 

 

18

Summary of Contents for EASYSENSE Q3+









































Reviews: