DS065 (5)
4
To fit the new battery pack:
Insert the connector of the new battery pack into
the socket and push firmly home.
Locate the battery into its holder. Fold the wires and
route into the channel at the side of the holder.
Note:
Wires should
NOT
be positioned on top of the
battery.
Replace the base and screw back in position. Replace the feet with the new ones.
Connect V-Hub to a supply of power and leave on charge for a minimum of
8 hours
to condition the
battery pack.
CAUTION
Do not disassemble, crush, puncture, drop, short external contacts, expose to high temperature or
dispose of the battery in fire or water.
Do not dispose of the redundant battery pack along with general
household waste. The batteries may be returned to Data Harvest for
recycling or alternatively contact your local waste disposal or
environment agency for advice on lithium-ion battery disposal.
Data Harvest Group Ltd, 1 Eden Court, Leighton Buzzard, Beds, LU7 4FY
Tel: 01525 373666, Fax: 01525 851638
e-mail: [email protected]
www.data-harvest.co.uk
WEEE
(Waste Electrical and Electronic Equipment) Legislation.
Data Harvest Group Limited is fully compliant with WEEE legislation and is pleased to
provide a disposal service for any of our products when their life expires. Simply return them
to us clearly identified as ‘life expired’ and we will dispose of them for you.
Red wire
Black wire
Channel for
battery wires
