Data Conversion Systems Vivaldi One User Manual Download Page 40

Page: 40 / 55

dCS

Vivaldi One Digital Playback System User Manual

Software Issue 1.0x

September 2017

Vivaldi One Manual v1_0x

Page 40

English version

Figure 8 – The menu sequence

Using the Menu

The menu gives the user access to a range of additional features. It also allows new features and
performance enhancements to be added later by software updates.

The menu is controlled by four buttons.

•

Press

the

Menu

button to open the menu or select a setting.

•

Press

the

►

button to page forward through the menu.

•

Press

the

◄

button to page backward through the menu.

•

Press

the

Power

button to close the menu. Most menu pages close after about 7 seconds.

•

While the Player’s menu is open, the Rotary Control pages forwards or backwards.

Use the Menu Guide sheet to help you find the right menu page.

There are six top-level menu pages:

The

INFORMATION

menu gives unit set-up details, software issues, serial number and

contact details.

The

AUDIO

SETTINGS

menu allows you to set some features that are not directly

accessible from the front panel.

The

UNIT

SETTINGS

menu sets up the unit to suit your system.

The

CONFIGURATION

menu allows you to lock important settings, save a standard setup

and reset the unit.

The

DISPLAY SETTINGS

menu is used to adjust the display.

The

SIGNAL GENERATOR

menu contains test and set-up routines.

Use the

►

button to move the blue highlight to the menu you want, then press the

Menu

button to select

it. The next menu level down is displayed. Use the

►

button to move the highlight to the menu page

you want, then press the

Menu

button to display the information or change the setting.

Select the return icon to go back to the previous menu level.

Summary of Contents for Vivaldi One
























































Search results

Summary of Contents for Vivaldi One

Reviews:

Related manuals for Vivaldi One

Brands by name

Popular brands

Data Conversion Systems Vivaldi One, User Manual

Search results

Summary of Contents for Vivaldi One

Reviews:

Related manuals for Vivaldi One

Brands by name

Popular brands