25
The alarm may be set to either yes or no. Press the Enter key to move the cursor from one alarm
to the next. Press the Up or Down key to change from Y (yes) to N (no).
Once selections have been made and with the cursor fl ashing in the title block, press the Down
key to see the next screen. The following message will be displayed (entries are for reference
only):
The alarm may be set to either yes or off. Press the Enter key to move the cursor from unit to unit.
Press the Up or Down key to change from Y (yes) to N (no).
Once selections have been made and with the cursor fl ashing in the title block, press the Down
key to see the next screen. The following message will be displayed (entries are for reference
only):
The alarm may be set to either yes or off. Press the Enter key to move the cursor from unit to unit.
Press the Up or Down key to change from Y (yes) to N (no).
Once selections have been made and with the cursor fl ashing in the title block, press the Down
key to see the next screen. The following message will be displayed (entries are for reference
only):
Zone Alarm Function 4
Stby
Off
Override Sch
Y
N
Air Flow
Y
N
Water Flow
Y
N
Power-Up Y
Y
Floor Water
N
N
Hum Inhibit
N
Y
Zone Alarm Function 5
Stby
Off
Heat Inhibit
Y
N
Dirty Filter
Y
N
Alarm SW #1
Y
N
Alarm SW #2
Y
Y
Alarm SW #3
N
N
Alarm SW #4
N
Y
Zone Alarm Function 6
Stby
Off
Manual Ovrd
Y
N
Hum Sensor
Y
N
RA sensor
Y
N
