11
Enter button to go to the display module address (Terminal) then use UP or DOWN button to
change address to 00 then press enter. The display will show “Display address changed”.
•
Turn unit’s the power off, Press and hold ALARM and UP button at the same time while
restarting the unit. After 20 seconds the controller will boot up and this message appears:
“Self Checking … Please wait”. Let go the buttons and wait.
•
The Mini-dap4 will show the current PLan address: 01- Press UP or DOWN button to
change the Plan address to a desired address number (0-16) then press Enter to save and
exit. The display may be blank at this point.
•
Press and Hold UP+ENTER+ DOWN button once again, the display address will show 00.
Press Enter to move the cursor to the display address then use UP/DOWN key to change
display address back to 32.
•
Press Enter button to go to I/O board address which is display “__”. Use UP button to
change I/O board address to the address that is programmed in the steps above then press
Enter.
•
Display will show “Terminal confi g press ENTER to continue”, press Enter again, the screen
will show the Trm addresses, change Trm1 from 00 to 32 then select “Ok?Yes” to save the
change.
•
The display will go blank for a second then start to display normal. Refer to Changing ad-
dress of the dap4 display section if
2.0.4 Changing the address of the dap4 display:
To change the address of the dap4 display, press and hold three keys: UP, ENTER and DOWN for
approximately 5 seconds, the following screens will show:
Press Enter key to move the cursor to “32”, then change the display address to a desired value,
for example 31. Press Enter key again. The display will show “Display address changed” and will
turn to blank. Press and hold three keys: UP, ENTER, DOWN for 5 seconds, the following will
show:
Press Enter Key until you see the following screen:
Display
address
setting . . . . . . . . . . . . . . . . . . . . . . :32
I/O Board address: xx
Display
address
setting . . . . . . . . . . . . . . . . . . . . . . :31
I/O Board address: xx
