DASS 3.0i LV (DSP-123i-ODS)
User manual
Copyright © DASS Tech Co., Ltd
- 49 -
Fault information
001 ID04 06150825
( Display the event sequence number, event ID
number, and event occurrence time )
(C) “SystemInfo” Interface as below
3.SystemInfo
------
Long press the button
1.Inverter Type
8.Power Factor
2.Serial Number
9.Reflux Power
3.Soft Version
10.Safety Paras
4.Hard Version
11.MPPT Scan
5.Country
12.Power Ratio
6.Modbus Address
7.Input Mode
The user enters the main menu by long pressing the button, short press and
turns the page to select menu contents, then long press the button to enter "3.
SystemInfo". Turning the page down can select the system information to view.
(D) Display Time
Long press the button and short press the button to turn the page in the
standard user interface to enter into “4.Display Time”,then long press the button to
display the current system time.
(E) Software Update
User can update software by USB flash drive ,Company will provide the new
update software called firmware for user if it is necessary,The user needs to copy
the upgrade file to the USB flash drive.
6.4. Update Software online
DASS 3.0i LV (DSP-123i-ODS) inverters offer software upgrade via usb flash
drive to maximize inverter performance and avoid inverter operation error caused
by software bugs.
