10
11
1.
Place the Motor Base on a stable surface.
2.
Place your ingredients in the Blending Pitcher.
Make sure to put all liquid
ingredients in first
, then powdered ingredients, and finally any solid
ingredients. Do not exceed the MAX line. You can use the Measuring
Cup to add ingredients to the Pitcher.
3.
Attach the Measuring Cup to the Lid by aligning the notches on the Cup
with the slots in the Lid and turning the Measuring Cup clockwise. Place
the Lid on the Pitcher.
4.
Set the Blending Pitcher into the Motor Base by aligning the marking on
the bottom of the Pitcher with the marking on front of the Motor Base.
5.
Plug the cord into a power outlet. Turn the Dial to your desired blending
speed. To stop blending, turn back the Dial so that the Position Indicator
is pointing up. For turbo blending or pulsing, you can turn the Dial
counterclockwise.
6.
Once you are done blending, wait for the blades to stop moving and
then unplug the Motor Base. Lift the Pitcher off the Motor Base.
Note:
Ingredients can be added to the Pitcher while blending through the
small hole in the Lid. To do this, select a low speed, turn the Measuring Cup
counterclockwise to remove from Lid, and then pour in ingredients. Make
sure to never exceed the MAX line. Once done, return the Measuring Cup to
the Lid before switching to a higher speed.
Clean the Performance Blender and all of its components prior to assembly
and use. Remove any stickers and packaging before first-time use.
WARNING: Do not use the Blender for more than 3 minutes at a time. Do
not blend hot foods or liquids exceeding 175°F. Do not overfill the Blending
Pitcher - ingredients should never exceed the MAX line.
USING YOUR BLENDER
