using your mini chopper ∙ 13
12 ∙ using your mini chopper
Using your mini chopper
Using your mini chopper
1
4
2
5
3
Place the Express Mini Chopper on a flat surface, then
place the bowl onto the Motor Unit and turn it counter-
clockwise until the lock is engaged and the Bowl cannot
move.
NOTE*:
You can make sure the Bowl is properly
installed by lifting the Bowl by the handle; you should see
that the Motor Unit and Bowl becomes one unit.
Plug power cord into an AC outlet. For rough
chopping, turn the knob to Chop, for fine chopping
activate the Pulse mode. To turn off appliance,
return the knob back to the Off position.
NOTE*:
The appliance will not work if the Bowl is not properly assembled on
the Motor Unit. Never operate the Express Mini Chopper without its Lid.
WARNING:
To avoid personal injury and/or electrical shock, do NOT insert
fingers or utensils in Bowl while machine is plugged in/operating.
Take the Blades and put them on top of the Drive
Shaft. Rotate it slightly so that it is positioned
correctly.
Wait for the Blades to fully stop before removing
the Lid, then unplug the appliance, remove the Lid
and Blades before emptying the contents.
Toss your cut ingredients into the Bowl, cover with
the Lid and lock it into place by aligning it with
its respective notches. Rotate the Lid counter-
clockwise until the Lid locks into the handle.
