28 ∙ page title
page title ∙ 29
Remove the Carafe Lid and fill the Carafe with cool or room temperature
water. Ensure that the spout on the Carafe Lid is closed for the brewing.
The ‘ ’ symbol should align with spout. This represents that it is closed.
NOTE: The maximum capacity for the Carafe is 1500 ml (or 50 oz.)
Do not overfill the Carafe past the MAX line, or below the MIN line.
The Carafe must be filled with at least 1000 ml (or 35 oz.) of water to
function properly.
NOTE:
The Coffee Container Lid has a Pressure Release Valve. If the
pressure of the Coffee Container is too high it will activate the Pressure
Release Valve, and as a result some liquid may seep out.
NOTE:
When the Rapid Cold Brew System is brewing, the Control Dial
can be adjusted to increase or decrease the brewing time.
WARNING: Wait until the white LED Indicator is off before removing
the Carafe. Removing Carafe early will cause coffee to spray!
Place the Carafe on the Base and rotate the Control Dial to set the brewing
time between 5-15 minutes, then press Power Button. The white Brewing
Light on the base will turn on and the white LED Timer around the Control
Dial will illuminate displaying the brewing time. It will shut off when the
brewing is finished and the full amount of cold brew will rise to fill the
Carafe and will bubble gently.
7
3
6
2
5
1
8
4
28 ∙ step by step
step by step ∙ 29
STEP BY STEP INSTRUCTIONS
Unscrew and remove the Coffee Container Lid and remove the
Brew Basket Assembly.
Turn the Filter Lid so pins release from notches and remove.
Add coffee grounds to the Brew Basket.
(See our recommended ratios on the following pages)
NOTE: Make sure the outside of the Brew Basket is clean and clear of
coffee grounds or any other residue.
Replace the Filter Lid on the Brew Basket, making sure the Lid is locked in place.
(There will be a clicking sound)
Place the Brew Basket Assembly back into the Coffee Container and press
down gently to ensure it is in all the way. Securely tighten the Coffee Container Lid.
Secure the Coffee Container on the Brewing Base by matching the two circular
columns on the underside of the Coffee Container with the corresponding holes
in the Brewing Base.
The process is finished when the white LED Timer around the Control Dial
shuts off and your cold brew rises to fill the Carafe.
To pour, turn the lid so the ‘ ’ symbol aligns with the spout.
Enjoy!
