Dascom DC-2300, User Manual

Page: 38 / 70

DC-2300 User Manual v1.0
24
2.2
Replacing the Ribbon
Change the ribbon when the OLED Display prompts [RIBBON END] message.
Approved Ribbons for this printer:
Please contact your local Reseller for ribbons not listed above.

Direct touching contaminates the Ribbon and causes uneven print
quality.

Avoid excessive impact on the Ribbon when replacing them.

Using non-genuine products may cause poor print quality and Printer
malfunction.

Quality and reliability of the non-genuine products are not guaranteed.

Even within the warranty period, fees may be charged on servicing the
printer using non-genuine products.
You can get the unused quantity of ribbon.
Refer Section 3.3 to get the unused amount of your ribbon.
Via the OLED Panel or through the Printers Driver, an estimation of the remaining Ribbon quantity
can be viewed if it is sufficient for your current print job. The OLED displays the [RIBBON END]
warning when ribbon is close to running out.
Type Description Product Code
1/2(YMC)KO
ribbon
yellow, magenta, cyan,
black, transparent
DUS PO:75046007
DAP
PO:75046008
DEU
PO:75046009
YMCKO
ribbon(500)
yellow, magenta, cyan,
black, transparent
DUS PO:75046004
DAP
PO:75046005
DEU
PO:75046006
K ribbon black DUS PO:75046010
DAP
PO:75046011
DEU
PO:75046012