DAS AUDIO INTEGRAL-MA, User Manual

Page: 31 / 48

31 Manual INTEGRAL-MA
INTEGRAL
Front display navegation and settings
OUTPUT PRESET
In the local memory of every device, DAS Audio provides a collection
of presets per system model (Output presets). You can find presets
for the following systems: ARCO-4T, ARCO-24T, Q-3T, Q-23T, Q-43T,
Q-10, ARTEC-306, ARTEC-308, ARTEC-310, among others . As a result,
the user can load individual presets for each output channel and
create a global preset for their installation.
There is a bank of FACTORY presets for all the DAS models destined
to the installation market (CL, ARCO, Q, ARTEC300, ARTEC500, HQ,
WR Series, etc.). The OUTPUT PRESET navigation menu is as follows:
There are two options in the OUTPUT PRESET menu: load a FACTO-
RY preset and load / save / delete a USER preset.
To assign a factory preset to a desired output, select the FACTO-
RY option with the ENTER key in order to access the FACTORY
sub-menu. Using the UP / DOWN keys, select the desired output
channel where the preset will be loaded. In this example, AMP-1
has been selected. Press ENTER. The display will show all the avail-
able presets. Select the desired preset with the UP / DOWN keys,
in this case, ARTEC-308, and press ENTER.
You can create your own presets from the factory presets. For this,
you can load an output factory preset, for example, the ARTEC-308,
and add EQ or change the gain. SAVE that preset as USER. Once
the preset has been created, go to the USER menu and select
SAVE, press ENTER and select the channel where the preset will
be stored, press ENTER, and finally, select a name for the preset, in
this case, DAVID AR-306.
If you want to RECALL a user preset in an output, the procedure is
similar. It is further described in the previous illustration (RECALL
AMP-1 ARTEC-308). Finally, user presets can also be deleted by
selecting the DELETE option in the SELECT ACTION menu. In the
list of user presets, use the UP / DOWN keys to select the preset
you want to delete and press ENTER.