7
II. Getting started
LJ-110B
II. Getting started
#
How to connect the batteries
♦
Remove the cover of the battery
compartment on the underside of the base
unit.
♦
Fit three 1,5V AA batteries, being careful
to match the “+” and “-“ signs on the
batteries to the signs marked on the
battery compartment itself.
♦
Replace the battery compartment cover.
Note!
Instead of batteries, the adaptor to the DC9
V
socket, which is placed on the side of the base
unit can be connected. The parameters of the adaptor must be as follows:
!
inside voltage –
U
IN
= 230V, f =50 Hz
!
outside voltage–
U
out
= 9V DC
!
current
I
outmin =
100 mA
!
standard plug (
Φ
=2.1 mm)
with „-” inside.
Adaptor is not in complete!
#
How to connect the handset and telephone line
♦
Plug one end of the coiled handset cord
into the handset and the other end into
the socket on the side of the telephone.
♦
Insert the base unit’s telephone line plugs
into the PTT wall socket and telephone
socket TEL IN as shown on the illustration.
Note!
The telephone is equipped with two line sockets. These sockets are connected in parallel. It does
not matter, where the telephone line and second telephone are connected.
