26
IV. Clip (Caller ID)- Calling line identification presentation
LJ-110B
Special case!
It may happen, that the number identified was stored without a prefix, which is
necessary to make long distance calls. Your telephone allows a prefix to be
added at the beginning of the number automatically. A prefix is added after
pressing the BACK button twice. In Poland, the prefix used is
0
.
To make a call using a number without a
prefix:
♦
press the
UP/+
or
DOWN/-
button to
select the number.
♦
Press the
BACK
button twice. The 2-way
speaker function will be switched on, the
prefix will be added and the number will
be dialled automatically.
♦
Replace the handset or press the
SP-PHONE
button to end the call.
#
How to set the local area code
At present, a local area code does not need to be entered to make local calls.
This function can only be used to specify local numbers. Entering a local area
code in the memory removes it from all numbers, which belong to the same
area.
To enter the local area code:
♦
press the
SET/HOLD
button. The display
will show
- 0 1 2 3 4 5 6 7 -
.
♦
Press the
3
button. The display will show
ArEA - - - -
.
♦
Using the keypad, enter the local area
code. For example, if you wish to enter
022
, press the following digits
0
,
2
,
2
.
♦
Press the
SET/HOLD
button to confirm
the setting. The display will show
– 0 1 2 3 4 5 6 7 -
.
♦
Press the
DEL
button. The telephone will
return to standby mode.
If no further buttons are pressed, the
telephone will return to standby mode after
several seconds. The settings will be stored.
To delete the local area code:
♦
press the
SET/HOLD
button. The display
will show
- 0 1 2 3 4 5 6 7 -
.
BACK
SET / HOLD
3
DEF
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
#
DEL
SET / HOLD
DOWN / -
UP / +
