13
III. Using the telephone
LJ-110B
♦
To end your conversation, replace the
handset on the base unit or press the
SP-PHONE
button. The time of your last
call will continue to be displayed for
several seconds,after which the telephone
will return to the standby mode. The time
of your last call can be displayed by
pressing the
OUT/X
button (see the
chapter:”OUT memory”)
Note!
The telephone number in the standby mode can also be entered (before lifting the handset or
pressing the SP-PHONE button).If you wish to delete the last incorrect digit, press the DEL
button. If you wish to delete the whole number, press and hold this button until the number
disappears from the display. If you wish to make a call, press the BACK button. The 2-way
speaker function will be switched on and the number will be dialled automatically.
#
How to receive a call
When the telephone rings (the IN USE
indicator flashes):
♦
lift the handset from the base unit or press
the
SP-PHONE
button.
In addition, the
VOLUME HI/LOW
switch can
be used to adjust the volume of the handset or
the
VOLUME Hi/Low
switch to adjust the
volume of the loudspeaker.
♦
After completing your conversation,
replace the handset on the base unit or
press the
SP-PHONE
button.
#
OUT memory
Your telephone can store up to 28 of the most recently dialled numbers in
the OUT memory. They can be reviewed by pressing the
OUT/X
button in
standby
mode. Each number may consist of up to 16 digits.
To review OUT numbers:
♦
press the
OUT/X
button. The display
shows the last number dialled and the
time of the call.
VOLUME
HI
LOW
SP
-PHONE
SP
-PHONE
SP
-PHONE
OUT / X
