18
III. Using the telephone
LJ-110B
To delete a number from it’s memory
location:
♦
press the
RECALL
button. The display will
show
rECALL
.
♦
Next press the appropriate code number
key. The number will be displayed.
♦
Press the
DEL
button twice. The number
will be removed. The telephone will return
to standby mode.
#
Flash function
This allows various switchboard facilities such as call transfer and
conference calls to be used. Contact your communications manager or the
person responsible for maintaining your switchboard to find out what
facilities are available.
The telephone allows the following values to be set: 90ms, 120ms, 180ms,
300ms, 600ms and 1000ms
To set the right Flash value:
♦
press the
SET/HOLD
button. The display
will show
- 0 1 2 3 4 5 6 7 -
.
♦
Press the
4
button. The display will show
an actual setting. The factory setting is
600ms.
♦
Press the
UP/+
or
DOWN/-
button to
select the right value.
♦
Press the
SET/HOLD
button to confirm
the setting.
♦
Press the
DEL
button. The telephone will
return to standby mode.
If the
DEL
button is not pressed, the
telephone will return to standby mode after
several seconds. The setting will be stored.
RECALL
M1
M2
M3
M4
M5
M6
M7
DEL
SET / HOLD
DOWN / -
UP / +
4
GHI
DEL
