background image

 
 
 
 
 
 
 
Limited Warranty 

The Versa Fresh Pak portable unit is warranted for a period of one (1) year from 
the date of purchase against defects in material and workmanship. This warranty 
covers  original  components  installed  by  W.  S.  Darley  &  Co.  at  our  factory. 
Expendable  items  (battery  and  filters)  are  not  covered  under  this  warranty.  This 
warranty  is  void  if  equipment  is  not  installed  and  operated  according  to  the 
instructions as listed in the Manual. It does not apply to damage caused by abuse, 
accident,  neglect,  freezing,  fire,  or  other  abnormal  conditions  beyond  the 
company’s  control.  This  warranty  is  void  on  any  part  from  which  the  original 
manufacturing date code decal has been removed or made illegible. This warranty 
requires the use of W. S. Darley & Co. authorized replacement parts. All models 
must  be  operated  and  maintained  in  accordance  with  this  Manual.  All  defective 
parts  must  be  returned  to  W.  S.  Darley  &  Co.  for  inspection  and  repair  or 
replacement. Contact  factory  for  a  Return  Materials  Authorization  Number  prior 
to  shipment.  W.  S.  Darley  &  Co.  will  inspect,  test  and  determine  cause  of 
defective component parts. W. S. Darley & Co. will have final determination as to 
which component parts are replacement of total units; and the cost of labor, new 
components, handling and packaging. Defective parts must be sent prepaid freight. 
W.  S.  Darley  &  Co.  will  not  be  liable  for  any  labor  charges  other  than  factory 
repairs. Incidental or consequential damages are not covered by this warranty. All 
claims must be submitted in writing to your ultraviolet equipment supplier within 
thirty  (30)  days  from  the  discovery  of  the  defect.  Thereafter,  your  ultraviolet 
equipment  supplier  will  correct  defective  parts  and/or  workmanship  within  sixty 
(60)  days  from  the  time  of  receiving  this notice.  This  warranty  is valid  once the 
customer  completes  the  applicable  Warranty  Form.  These  forms  must  be  sent 
back to the pertinent distribution center to keep on file. 

 
 
 
 
 
 
 

Summary of Contents for Versa Fresh Pak










Reviews: