10.
Flush complete prepare for use, replace pre filter and post filters and put
them back in the system, put
Out Valve
in
Run
position and
In valve
to
Run
position
11.
Now your Versa Pak is ready to use, turn on the pump and let the system
pressurize
Getting Started
1.
Plug suction line (line with Strainer) into the
In
push to connect fitting
2.
Plug effluent (finished water) line into
Out
push to connect
3.
Place suction strainer into water to be treated
4.
Set
Out
Valve to the
Run
position and
In
Valve to the
Run
position and
then turn on the Versa Fresh Pak by flipping
Switch
5.
If unit does not prime, press the red button on Pre-filter (
③
) and hold for a
few seconds, then release
6.
Run Versa Fresh Pak for a few minutes to flush
7.
To turn off Versa Fresh Pak, push down on the power
Switch
and let drain.
As soon as both gauges read o psi, turn
Out valve
to
Backwash
and
In
valve
to
Off
8.
Remove both
In
and
Out
lines from push to connects and insert plus before
transport
❖
Do not use on raw water of unknow chemical water quality, fresh water ONLY! This
system is designed for treating particulate, turbidity, bacteria, virus and cysts. To be
operated by qualified and trained personnel ONLY!
