Page 37 of 43
5.5 Adjustments
Rotation arm (ceiling version)
If the Rotation arm’s start to drift then the ceiling mount system may have become uneven; to
correct this issue you will need to adjust the relevant nuts on the ceiling mount, these are
indicated in section 3.3.1 of the installation section in this user manual. The suspension arm
can also have its tension adjusted by using a hex tool in the grub screw located on the opposite
side of the arm boss to the main arm section.
Suspension arm (all versions)
The suspension arms can be adjusted in several ways however its upward and downward
movement is controlled with internal adjusters accessed through a sliding cover halfway down
the arm. Slide the white plastic cover to the side to reveal a cut-out section. Insert a hex tool
into the hole in the silver section and turn to the side to adjust the tension.
Insert hex key here
The horizontal rotation of the suspension arm is controlled by an allen key at the two points
pictured below.
Adjustment points
Summary of Contents for SL730LW
