DAQ system USB3-FRM20, User Manual

Page: 24 / 27

USB3-FRM20 User’s Manual
23
Appendix
A-1. MIPI-PWR02 Power Board
1. J1 Connector (2x20 Pin Right Angle Type)
It is connected to the power and the signal is as follows.
1
2
3
4
9 5
6 8
7
10
11
12
13
14 20 24
23 21
22
19
18
17
16
15
26
25
27
28
29
30 36 40
39 37
38
35
34
33
32
31
[Figure 1. J1 Connector (Top View)]
[Table 1. J1 Connector Description 설명]
No. Name Description Remark
1 GND Ground
2 +5V_IN Share to sensor power 5V
3 GND Ground
4 V_IO2 V_IO2 Power
5 GND Ground
6 VCC12_WALL 12V Adapter Power 12V
7 GND Ground
8 VCC12_WALL 12V Adapter Power 12V
9 SP0 SENSOR Power 0.9 ~ 4.1V
10 SP1 SENSOR Power 0.9 ~ 4.1V
11 SP2 SENSOR Power 0.9 ~ 4.1V
12 SP3 SENSOR Power 0.9 ~ 4.1V
13 SP4 SENSOR Power 0.9 ~ 4.1V
14 SP5 SENSOR Power 0.9 ~ 4.1V, 5V, 12V
15 GND Ground
16 GND Ground
17 N.C No Connect
18 N.C No Connect
19 N.C No Connect
20 N.C No Connect
21 SPI_CLK SPI Clock
22 SPI_MOSI SPI Master Out Slave In
23 SPI_EN SPI Enable
24 SPI_MISO SPI Master In Slave Out
25 OS_SCL OS SCL To be update
26 OS_SDA OS SDA To be update
27 GND Ground
28 GND Ground