http://www.daqsystem.com
USB-EK01 Users Manual (Rev 1.0)
- 35 -
And it uses a communication speed to 19200bps in the debugging mode.
For the following Dialog box to appear a setting way if you perform a menu
“
Target1
”
at Project/Option for Target, you set it up to press a setting button as you
select a debug tab.
[Figure 5.12 Keil Debugging setup window1]
And you shall use the monitor driver which isn
’
t a default driver of DAQ in case of
the debugging. At this time you test it as you perform it after confirming contents of
a cpdaqmon.bat file of a Driver folder. You perform it after disconnecting a board
with PC when you use batch command.
In the state that loading became a project and press
button like figure 5.9, a
screen will be changed by operating debugger like figure 5.12. From here you can
test the debugging step by step. You can confirm CPU register, memory data
assembly nicmonic etc. and adjustment is possible in case of the debugging.
Detailed program usage should refer to a Keil Manual.