http://www.daqsystem.com
USB-EK01 Users Manual (Rev 1.0)
- 41 -
3
PID Low
4
PID High
5
DID Low
6
DID High
7
Not Used
5.5.3 Serial EEPROM with First Byte is 0xB2(fw_out.eep
참조
)
If the first byte value is 0xB0, registers it to Host(PC) as like following table. After
an execution binary image download to memory at EEPROM, you shall release 8051
at reset at a device driver or application program.
It is mainly used when the program capacity is small and EEPROM capacity is
enough and you need not to directly connect to PC.
EEPROM
ADDR
Description
0
0xB2
1
VID Low
2
VID High
3
PID Low
4
PID High
5
DID Low
6
DID High
7
Length High
8
Length Low
9
Start Address High
10
Start Address Low
--
Data BLock
--
--
Length High
--
Length Low
--
Start Address High
--
Start Address Low
--
Data BLock
--
