http://www.daqsystem.com
USB-EK01 Users Manual (Rev 1.0)
- 34 -
[Figure 5.10 a way to download execution binary (*.hex) at USB-EK01]
The above way is a way testing a direct execution code after download through
USB connection, a way of debugging with serial communication is as follows.
As the debugging uses a serial communication(COM1 at board), you cannot use it
with comm.exe program at the same time.
If using com2 at board, after being load with a
”
mon-int-sio1.hex
”
monitor
program to a board, you shall use it as making JP2 of a board and the separate cable
which can connect.
The cable connection is as follows.
1
3
2
1
3
2
4
5
6
7
8
9
5264-03
DSUB 9pin
[Figure 5.11 COM2 Cable connection]
