USB-AIO10 User’s Manual (Rev 1.1)
-
8-
http://www.daqsystem.com
(4) If new hardware is found, Wizard will ask you to install the corresponding driver. To install the
driver in the above figure, select "Browse the driver software on your computer (R)" and
press the Next button. The following driver search screen will appear.
In the figure above, click the Browse button on the Driver folder of the CD that contains the
driver, specify the 32/64 bit of the operating system to be used, and then click the "Next" button.
Select the folder where the drivers are located. Click “OK”. Click “Next”.
The necessary files are
“usb_aio10.inf”
and
“usb_aio10.sys”
in the driver folder.
