USB-AIO10 User’s Manual (Rev 1.1)
-
19-
http://www.daqsystem.com
6
WR Pointer
Display the buffer pointer of stored in the library to read from the
board. 0x800000 is the number of data.
7
RD Pointer
Display the library buffer pointer to read from the application.
8
View Scale
Write a value to attenuate the level of article 19 that displayed in
the graph.
The range of the Analog Input value is 0~65,535(5V/20mA), it
mark by the attenuation because a range of values is larger to
display.
9
Offset
Write the value to move the graph level.
10
Set
Set the listed value of the article 8, 9 to analog input data display
part.
11
Voltage(CH1)
Display the converted to a voltage level of analog input channel
(CH1).
12
-
Display the collected data for each channel.
13
Single Read
Current Analog Input data read once. It can use when the state
of continuous data collection stop.
14
CH1
After write the Analog Output value, set that value to CH1.
The output value range is 0~65535(5V/20mA).
15
CH2
After write the Analog Output value, set that value to CH2.
16
CH3
After write the Analog Output value, set that value to CH3.
17
CH4
After write the Analog Output value, set that value to CH4.
18
ALL
After write the Analog Output value, set that value to all channel.
19
Set
Set the Digital Output value.
20
Get
Check the Digital Input value.
21
Graph
It is displayed that Analog Input value is calculated by using
Scale and Offset.
