USB-AIO10 User’s Manual (Rev 1.1)
-
10-
http://www.daqsystem.com
(7)
If the installation is completely finished, you confirm it in the following ways. Do the following
steps to show up the “Device Manager” window. [My Computer -> properties -> Hardware ->
Device Manager -> Universal Serial Bus Controller ->
“DAQ System Analog Input/Output
Board”
]
If you can see the “DAQ System USB2.0 Multi-Function Board” at Universal Serial Bus
Controller, the driver installation is to have been over. (Check the red circle)
Notice : After installation, you should re-boot the system for the proper operation.
