USB-AIO10 User’s Manual (Rev 1.1)
-
17-
http://www.daqsystem.com
4.9.1 Analog Input Mode Selection
Analog Input Signal Voltage/Current Mode selection jumper connector location is shown in Fig
4-9, it displays the connector and corresponding channel number.
Initially it is set to voltage mode.
J5 – AIN1
J4 – AIN0
J8 – AIN3
J6 – AIN2
[Figure 4-9. Analog Input Mode Selection Connector]
4.9.2 Analog Output Mode Selection
Analog Output Signal Voltage/Current Mode selection jumper connector location is
shown in Fig 4-10, it displays the connector and corresponding channel number.
Initially it is set to voltage mode.
J10-AOUT0
J11-AOUT1
J15-AOUT2
J18-AOUT3
[Figure 4-10. Analog Output Mode Selection Connector]
