NET-FRM01 Users Manual (Rev 1.3)
-
17-
http://www.daqsystem.com
4. Network Setup
The NET-FRM01 don’t need a separate device driver because it uses for network. However, it is
used by specifying IP(Internet Protocol) address identifier. It is possible to install and use the service
on the network Filter Driver.
4.1 Filter Driver Installation for Win XP
Installed a filter driver can reduce the PC resources. The procedure is as follows. "My Network
Places
local area connection
properties" is selected, this comes under the network properties.
[Figure 4-1. Network Connection Property]
